The Harry Potter of ventirades
For me it's magic. It looks like a ventirad with an (ugly) fan like all the others. And yet... No noise and cooler than my old WaterCooling
For me it's magic. It looks like a ventirad with an (ugly) fan like all the others. And yet... No noise and cooler than my old WaterCooling
This is a very good quality fan, very quiet compared to mid/low range models. The material is solid and made to last.
Easy to install, cools perfectly my AMD Ryzen 9 3900X mounted on the MSI MPG X570 GAMING EDGE WIFI motherboard
SIMPLY THE BEST !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
This is the eighth one I've bought, for myself and others.
It's not noisy.
Of course, you also have to manage the fans of the case.
Excellent in the following tower configuration:
1x AMD Ryzen 9 5950X (3.4 GHz / 4.9 GHz)
1x ASUS TUF GAMING X570-PLUS
2x Corsair Vengeance LPX Series Low Profile 16 GB DDR4 2666 MHz CL16
1x Gigabyte AORUS GeForce RTX 3070 MASTER 8G (rev. 2.0) (LHR)
1x Noctua NH-U12S
1x Fractal Design Define 7 Solid Grey
1x Corsair RM750x 80PLUS Gold
1x Crucial P2 M.2 PCIe NVMe 1Tb
1x Microsoft Windows 10 Home 32/64bit
I was expecting silence, but not that much! I was expecting efficiency because of its reputation, but I'm surprised, my ryzen 3700x ran for 10 hours at 100% in a room at 30 degrees last night and didn't exceed 69.5, while remaining in total silence, with or without headphones, you just don't hear it! the assembly is childish, really nothing to complain about (personally I use it as a push system, not as a suction system or double fan)
I recommend it without hesitation, on the other hand it is massive (in height only, so it does not interfere with the ram, gc or anything) and knowing that it is provided with several supports, it is usable even if we change intel to amd etc. so it is a good investment ^^
I have ordered a second fan for my home and it is very easy to install. It is very easy to install and it is very easy to use and it is very easy to use. 10/10 By the way I ordered a 2nd fan.
Ryzer 3 2300x Stock 51° at rest
71° on Bf4
Ry... Noctua 32° at rest
49° on Bf4
Well for the cooling, the fan at full power is RELATIVELY noisy, of course nothing like a stock ventirad, but more than a BeQuiet Silent Wing3, I replaced it with this one without any problem.
The product is compliant, quiet and slim in Cooler Master QL500 type cases. In short Noctua is a serious product
Easy to install, documentation in French, efficient ventirad and no led since it is not a Christmas tree but a ventirad.
The I9 9900 runs at less than 50°C and some peaks at 65°C.
As for noise, you can't hear it.
In short, NOCTUA quality without the gimmicks.
very good product, received on time, very quiet, as expected from the brand, fixing for a second fan at the top
well detailed instructions, easy to assemble, very quiet and perfectly efficient
I highly recommend it
Nothing to say, the ventirad is not too noisy in High Speed. Installed on an i9 it does its job very well.
I'm disappointed, can't do better for the price...For the radiator 4/10, and for the fan 3/10.
The performance is mediocre even with a good thermal paste...
I have nothing to say about this product, LDLC is always good about delivery times, the product itself is perfect. The product itself is perfect, cools my CPU perfectly, other ventirads don't exist anymore for me.
Nhu12s originally bought for an x4 860k, perfect at the time for cooling, even oc.
Upgraded to a ryzen 1600, am4 kit offered by noctua and received within 3 days.
Fan set to start at 40°.
Under windows in office use: the fan does not turn.... yes it is fanless (35° max).
In bench or games, it does not exceed 50° with 700 rpm, it remains inaudible.
Room temperature at 20°.
What more can you ask of it? (If the size is a bit big, prepare the large cases).
Perfect Ventirad.
First Noctua ordered and I'm not really disappointed. The bundle is quite well supplied, the ventirad seems to me of very good quality.
Bought to replace a Corsair H110i GT whose pump failed, this NH-U12S, much cheaper, cools perfectly my I7 4790k@4.6GHz.
I am very satisfied with my purchase. LDLC always on top, nothing to say.
I'm very pleased with the quality of the product and the service.
Nothing to complain about, it's my 2nd Noctua, the silence is always present. Less expensive and as efficient as watercooling.
Small tools and quality thermal paste provided unlike other brands.
A monster of a fan (be careful with other components and the size of your tower to fit it in your PC.
Very quiet (even in gamer mode) and does its job perfectly. No overheating noted...
I'm very pleased with the quality of the product and the service. Great service from LDLC for the delay in delivery.
mounted on Intel 7600K + asus prime Z270P.
Quick and easy installation.
Very quiet in be quiet 800 case.
Noctua a reference for fans.
The cooling is very very good.
Thank you LDLC.TOP delivery
I have received the product and I am very pleased with my configuration: Intel core i5 8600k 3.6GHz 16 gO RAM ddr4 Windows 10 64bits graphics card Msi 1050TI gtx. The fan does its job and the processor stays at 39°C in simple use without boosting the fan.
I've been using it for a while now and I'm not sure if it's a good idea to use it for a while.
Mounted on an I5 8600k and 16gb of ballistix sport on a gigabyte ultra gaming, the whole thing is suitably refined and I'm at 27 degrees at rest.it's a great quality ventirad.the thermal paste is supplied and the different socket mountings too !!! It's a very good quality ventirad, the thermal paste is supplied and the different socket mounts too!
It's a great product and I'm very happy with it.
I've been using it for a while now and it's a great product.
COLIS:I5 8600K BALLISTIX SPORT 16go ddr4 2666 NOCTUA NHU12S ULTRAgaming z370 rev1
The radiator is perfect. No problems during installation. The fan is relatively quiet, even when playing.
However, the fan is a bit "cheap".
It deserves to be better made. I think it can be replaced by another one
But apart from that, satisfied.
Config:
- MSI Z370-A PRO
- Intel Core i5 8600k
I have always used the original intel ventirads until this purchase. What a surprise! Perfect cooling, impressive silence. I will never go back. The quality of the hardware is excellent.
I was able to fit it perfectly into a mini ITX (zalman M1 case) on an I5 7600K.
Bought to replace a Noctua NH-L12 which was no longer doing the job with an AMD FX 8350 Black Edition processor which heats up quite a bit, TDP problem, I am very satisfied, does its job well with two 12 cm fans and especially very quiet even with the two 12 cm fans, perfect value for money at Noctua and LDLC
Excellent product, supplied with everything you need.
The only downside is the size of the unit. It just fits in my super lanboy air. I'm glad I didn't take the ones above!
But otherwise, it does its job well and very quietly.
Excellent value for money, relatively easy to install and once in use, it is very quiet. Last but not least: it does its job and cools efficiently. I am very satisfied!
I ordered this Noctua to cool a 7700K.
Does not interfere with RAM strips.
Easy installation.
Good performance.
However, don't make the same mistake I did.
I had an extra fan with clips and thought I would mount it in push-pull mode, paying attention to the airflow direction. It was a bad idea 5°C more with both fans in the same conditions; under load under OCCT.
The cooling capacity is more than correct.
Except that the machining of the parts at Noctua is not top notch and it's a pain in the ass to assemble. I strongly advise anyone who orders a Noctua not to hesitate to go on their website and fill in the form to receive a free adaptation kit as soon as a part breaks.
The fan is quiet and the instructions are precise so it is easy to install.
The price is reasonable for the quality of the product.
I installed it on an Intel Core i7 + Zalman Z11 and a msi motherboard.
I don't often comment on a purchase but I have to say that I and several people I know are very satisfied with the LDLC service.
I dialled my pc and forgot to add the assembly, but no worries, a quick call and everything is fine. Assembled and shipped in a timely manner, received in 8 days after payment was received.
A quality service like we would like to see more of. 100% satisfied.
very good fan!!! the maximum temperature before installing this fan was 80 degrees once installed, the maximum temperature reached of my processor went down to 25-30 degrees provided with thermal paste.
Here, my friends, is the processor fan silencer summon. The installation is quite simple, but feel free to watch a Youtube video if you have to (which I did), and it's done in a few minutes.
Everything works, fast delivery, thanks!
Mounted on my i7 4790k, I have temperatures of maximum 65°C (peak) and 55°C when I have the case open for better ventilation. I think I can overclock a bit, which I didn't think I could do with such a small aircooling!
Very happy with my purchase, and of course, the silence is there!
Great product, well designed and impressive.
It doesn't interfere with RAM, is very quiet and is quick and easy to fit.
Plenty of accessories, thermal paste and tools included, which makes things much easier.
A ventirad as I like them, imposing to dissipate the heat well while remaining very quiet.
Doesn't have any problem with ram strips.
It's very quick to assemble, very well packaged, tools included.
Fan on silent blocks.
In short, classy and efficient
Installed on a fx8300, cools very well, very quiet, really 100% compatible with all kinds of RAM. As usual Noctua, very good brand. Very well packed and great installation guide, easy to install
Efficient mounting hardware and a reliable, extremely quiet product!
All hardware is provided to install this heatsink + fan on an Intel or AMD processor.
I recommend it for a demanding configuration!
I received the package in perfect condition: I liked the fact that there was a lot of bubble wrap.
I'm giving it four stars because I haven't fitted the fan yet.
I am waiting to see how reliable it is over time.
Mounted on an i5 6600K OC at 4 Ghz a MSI Z170-A Pro and a 1070 with 3 Silent Wings from BeQuiet this ventirad is exceptional my tower is very well cooled (ventirad replacing a LEPA AquaChanger Watercooling. THANK YOU LDLC again
At first I seemed a little confused that I didn't see any thermal paste, but I hadn't opened my eyes...
Everything inside is supplied properly, assembly is easy, the thermal paste seems to be of good quality. The ventilation does not make any noise!
My very first ventirad, I don't regret it!
The installation is quite simple.
I mounted it on a Z87-G45 gaming, it fits PERFECTLY, and does not encroach on the RAM slots.
I recommend it to you!
Like the 100 comments above, I recommend it!!! Easy to mount on an ATX motherboard, no worries with the proximity of the RAM, and then what about the cooling... It gave a new lease of life to my CORE I7 2600K, which runs without flinching at 4.5 Ghz with a maximum temperature of 55°!!! It's enough to make me feel like a mid-range processor today!
This cooler cools any processor beautifully. I do NOT hear it, even under full load.
In the package there is EVERYTHING: Phillips spanner, plastic collars, high efficiency thermal paste, adhesive strips, extension cable, mounting accessories to attach a second fan to the heatsink... And to top it all off, it even comes with all the necessary accessories to mount it on AMD (AM2(+), AM3(+), FM1, FM2(+)) and Intel (LGA2011-0, LGA2011-3, LGA115x (LGA1150, LGA1155, LGA1156)) sockets. It will also be fully compatible on future sockets.
Caution: consider the dimensions of this object with the available space in your tower around your CPU.
Tip: organize the airflow inside your machine intelligently for a better efficiency of the cooling system.
The packaging is impeccable, the instructions are clear and make assembly very easy. The I7-6700K is quiet and efficient. The quality thermal paste is easy to spread for even more efficient application.
The finish is perfect and the mounting system is very well thought out.
For my first PC assembly, it was the CPU/Ventirad assembly that scared me the most.
It was a piece of cake thanks to their ingenious assembly system: You put the backplate, the spacers and a blade on each side, and screw them onto the motherboard. The only thing left to do is to fix the ventirad on these blades thanks to 2 pre-mounted screws on spring to exert the perfect pressure.
Mounted on a 6700, I am at 20°C in idle and 35°C in play. All in absolute silence :-)
PS: the colour was a bit of a turn-off at first, but seeing it in real life it's different, it looks good.
On a more serious note, after using an AIO H60 on my i7 4790k (was running at 70°C with Aida64), I made the mistake of buying a bad loop with a 360mm heatsink.
This fridge is just great! Easy to use, great components and well worth the price.
For those who think the price is a bit high, it's not entirely wrong but you should know that Noctua has an NF-F12 fan built in (I would have put an NF-P12 for more pressure but it works) and a WHOLE tube of Noctua thermal paste too.
So the total paid is 68,95€, but the fan costs 18€ (I think) by itself and the paste 8€ or 10€. So about 40€ for the tower alone!
LDLC at its best. The people on the phone are experts. This is so rare that it is worth mentioning. Congratulations
I'm very happy with the product. It just fits in the tower, it's perfect, I had measured before ordering, fortunately otherwise I could have taken bigger and been annoyed.
I chose this cooling unit for its quality of cooling of the processor and its silent side. I was a little afraid for the size but it goes super well with a case fractal design défin r5, motherboard asus maximus VII hero, processor intel core i7 6700k, barrettes g skill rappjaws 5 serie rouge 2X16 go, ssd Samsung 1to and graphics card msi gtx 1060 6go.I've been to the store for a while now and I'm very pleased with the service and the quality of the products. I've been to the store for a while and I'm very pleased with the service.