I took this device to use as an access point.
It says in the doc to reset it and configure it via a browser by typing http://dlinkap
THIS IS A BIG LIE!!!
the box is by default at the address 192.168.0.50 which is not mentioned anywhere in the doc nor on the site of DLINK
If you are connected via a LiveBox in 192.168.1.1, the box will be inaccessible by default.
It will be thus obligatory to modify MANUALLY your IP of your PC in order to configure it and then, no worry, it will function nickel
This WIFI access point offers a lot of possibilities, the setting is quite easy but the connection does not hold. Many interruptions and average coverage.
The return to LDLC was no problem.
Delivered quickly and to specification.
Installation was straightforward and worked first time with a big performance improvement over the old system.
Review automatically translated
by Arnaud D
Posted on 29 May 2020
Bought on 18 May 2020 from LDLC
Number of reviews: 27Average rating: 8
Not functional in WIFI relay
I bought a wall-mounted version of the DAP-1365 as a replacement for a DAP-1365, which worked very well and served as a WIFI relay.
I received the F1 version at HARDWARE level. The flashing in OPENWRT is not possible (flash too small, a variant exists but not in F1 version...).
The 1st installation must be done by RJ45 with the WIFI of the PC cut (IMPORTANT) then it is necessary to enter the address of the router http://dlinkap. ( only one "P" + the dot "." )
The notice is succinct, the interface in ENGLISH (not embarrassing it's simple) but the language packages to load are not present on the DLINK site just like the detailed notice (the customer service, reactive, directed me: ftp://ftp.dlink.de/dap/dap-1360/documentation/DAP-1360_man_revf_Manuel_fr.pdf ))
The problem is that in WIFI relay use, the DAP-1360 only proposes the creation of an SSID identical to the one you want to amplify and not a new different SSID. Moral: there is a conflict under WIN10, when one wants to connect on the strongest SSID ( yes the SSID appears in double, it is not a separation 2.4-5.0 Ghz, by deduction one takes the strongest signal) one arrives at a message "no Internet" in spite of it manages to connect ( without key WPA, curious ) and the 5 bars of reception whereas the DAP-1365 did it very well with a new SSID!
Useless, considering the price, no desire to lose time SAV and return, it will end up at the bottom of a wardrobe!
Review automatically translated
by SebastienR
Posted on 26 Apr 2020
Bought on 29 Feb 2020 from LDLC
Number of reviews: 2Average rating: 7
Unsatisfactory
This access point has several negative points:
- the configuration: it's a horror! The automatic protocol does not work and I had to look for the IP address for a manual configuration on the forums (which I believe to be 192.168.0.50)
- The quality of the signal did not satisfy me and I did not reach the expected speeds (config in Wifi client to connect an outbuilding).
I changed for the TP-LINK TL-WA901ND and there nothing to see! Moreover, I am globally much more satisfied by the TP-LINK brand and I will not be asked to go elsewhere again!
Review automatically translated
by RaphaëlV
Posted on 7 Nov 2019
Bought on 9 Oct 2019 from LDLC
Number of reviews: 1Average rating: 9
Works
This router does its job, no throughput problems, however, I found the installation complicated with my mac, I had to use this video which worked very well for me: https://www.youtube.com/watch?v=M3nkZAkcoJk&t=182s
Review automatically translated
by Lacagouille17
Posted on 9 Jul 2019
Bought on 9 Jun 2019 from LDLC
Number of reviews: 7Average rating: 8
Not very efficient...
The set-up is not easy even with the assistance of DLink technical service. The technician forgot to restart the PC after changing the address...
I'm disappointed about the range. There are about 40 metres between the box and the garage I want to connect and, even if I place the equipment halfway, it doesn't always work.
Review automatically translated
by Domauss
Posted on 17 Jul 2018
Bought on 24 Aug 2017 from LDLC
Number of reviews: 2Average rating: 8
Impossible configuration for beginners
Yes, you have to go to the DLink website to find the information: this AP is delivered with a factory IP configuration of 192.168.0.50 so if you are on a 192.168.1.X network you will have no chance of finding the website with the URL http://dlinkap.
Then you have to update the firmware to F1 6.11 which is also available on the dlink website.
Then it seems to work better than my box sfr which has difficulty in routing the wifi permanently (forced reconnections thus painful).
Review automatically translated
by Anonymous
Posted on 9 Jul 2018
Bought on 4 Jun 2018 from LDLC
Number of reviews: 1Average rating: 2
Not stable
This WIFI access point offers a lot of possibilities, the setting is quite easy but the connection does not hold. Many interruptions and average coverage.
The return to LDLC was no problem.
Review automatically translated
by RIEMER
Posted on 22 Feb 2018
Bought on 9 Feb 2018 from LDLC
Number of reviews: 61Average rating: 7
Very good buy But!!!
I took this device to use as an access point.
It says in the doc to reset it and configure it via a browser by typing http://dlinkap
THIS IS A BIG LIE!!!
the box is by default at the address 192.168.0.50 which is not mentioned anywhere in the doc nor on the site of DLINK
If you are connected via a LiveBox in 192.168.1.1, the box will be inaccessible by default.
It will be thus obligatory to modify MANUALLY your IP of your PC in order to configure it and then, no worry, it will function nickel
Review automatically translated
by Vincentim
Posted on 7 Apr 2017
Bought on 9 Mar 2017 from LDLC
Number of reviews: 3Average rating: 10
Very versatile, complete set of parameters
The possibilities of this repeater are very wide: access point, access point client, workgroup bridge, workgroup bridge with access point, repeater, WISP client router, WISP repeater.
Not necessarily for total beginners, but very practical for bridging two remote sites by putting an external antenna for example. In this case, two DAP1360s are needed, but given the price, this is a very affordable configuration.
Review automatically translated
by Anonymous
Posted on 22 Feb 2017
Bought on 8 Feb 2017 from LDLC
Number of reviews: 1Average rating: 5
Bof
I was looking for a reliable wifi access point but I'm confused.
The connection does not hold very well (many interruptions).
It was impossible for me to have a stable connection outside of DHCP. The Static IP option exists but no Internet connection if it is activated...???
Too bad...
I hesitate to recommend such a product.
Review automatically translated
by Anonymous
Posted on 23 Nov 2016
Bought on 25 Oct 2016 from LDLC
Number of reviews: 1Average rating: 10
Powerful and easy to set up
A good product with good performance, settings that can satisfy all cases, network radiating far enough, not really calculated the maximum, but quite powerful.
No regrets for having opted for this D.Link DAP-1360.
Review automatically translated
by Anonymous
Posted on 4 Aug 2016
Bought on 25 Feb 2015 from LDLC
Number of reviews: 1Average rating: 6
D-LINK DAP-1360
Careful packaging, delivered on time. I'M NOT SURE WHAT TO DO WITH IT, BUT I'M SURE IT WILL BE FINE:
Why put an install CDROM valid only for windows Vista? when I only have windows 10 or linux!
I'm not sure what to do with it, but I'm sure it's a good idea to check it out.
