Pictures may differ from actual products
To boost your installation, there is nothing like the Focal Impulse 4.320 amplifier associated with the ISO IY-AC connector. Take full advantage of the qualities of this 4 channel digital micro amp with 4 x 55 Watts for a powerful equipment.
Ultra-compact 4-channel amplifier - 4 x 55 Wrms Y-adapter cable in ISO format (1m)
Efficient technology and easy installationThe Impulse 4.320 uses technology derived from the Performance Series FD amplifiers. With an efficiency of over 90%, Class D offers many advantages: low heat build-up, low power consumption, low distortion at high volumes, compact size. The amplifier thus achieves an unequalled size/power ratio. It develops 4x55 or 2x160 Watts RMS under 4 Ohms. Comfortable power, fast attack for a realistic and more airy sound, it will transform the listening of your front and rear speakers.
With dimensions of only 17.65x4.6x6.7cm, the Impulse 4.320 can be easily hidden in the dashboard or centre console. Featuring both high level (with auto-detect) and low level inputs, it is compatible with all car radios. Supplied with brackets, adapters to take the speaker outputs from a car radio, RCA adapters for aftermarket car radios and a power connector, the amp is designed for easy installation. It does not require direct battery power. |
 |
 |
Very flexible in useTo accommodate different car radios, this amplifier has a 2 or 4 channel input selector. It is primarily designed to drive the front and rear speakers. However, it can also be used in 3 or 2 channel mode, to meet all the enhancement needs of a small installation.
Each pair of channels incorporates an active crossover to perfectly match the sound response to the speakers in use. The front channels can be operated at full bandwidth or cut high-pass at 75 Hz when using small diameter speakers. By avoiding low frequencies on a small diameter speaker, the listening experience becomes sharper. The rear channels are equipped with an active crossover and progressive phase adjustment to handle a small subwoofer or full range speakers of different diameters. |
Select your criteria
General information |
Product name |
Focal Impulse 4.320 ISO IY-AC connector |
Brand |
Focal | |
Model |
FOCAL IMPULSE 4.320 - + CONNECTEUR ISO | |
Main characteristics |
Product type |
Amplifier |
Amplification |
Power |
220 W |
Number of channels |
4 | |
Warranties |
Commercial warranty |
Seller 3 years |
Legal warranty |
See terms & conditions |
See all Focal products
Product referenced on 12 Oct 2016
the iso iy-ac connector is great for a direct connection to my 2006 laguna and this little plug does the job well and is small enough to be installed anywhere. I recommend this kit to improve your audio system.
Great product, you can immediately see the difference in sound with the original car radio in my vehicle.
I would recommend it.
It hides perfectly behind the car radio and works very well for its small size.
Easy to connect using the ISO connector
easy to install with my original car radio (just add its "Focal PSA Y-ISO Harnes", if you have a Peugeot after 2017)
power gain coupled with "FOCAL INSIDE IS PSA 165".
I recommend it for sound buffs
the system was installed in a Peugeot expert from 2017 with door isolation
I bought this amplifier to install in a Toyota Auris 2017 with the original ToyotaTouch2Go and amplify the Focal IS TOY 165 speakers in the front and Focal IC TOY 165 in the rear. Good quality amplifier (Focal quality is always there). A clear improvement of the sound, gains of power and audio quality. In addition, you need to buy two cables: the Focal Toyota Y-ISO Harness (white and brown plugs) and FOCAL IMP EXT150 I/O (1M50). Installation is quick and easy.
In the same universe: 4.320 | focal amplifier | imps | amplifier | car amplifier bluetooth | impuls | focal impulse 4.320 | impulse 4.320 | focal impulse | focal
