Alpine PXE-C80-88 OPTIM8
Amplifier 6 x 35 W + 2 x 130 W
Pictures may differ from actual products
The Alpine OPTIM8 is an 8-channel DSP amp designed for high-resolution audio. It has been designed to work with all car radios. It offers 6x35 + 2x130 Watts RMS under 4 Ohms and remains stable under 2 Ohms.
Amplifier 6 x 35 W + 2 x 130 W
The 8-channel DSP amplifier with automatic settings
TheAlpineOPTIM8 is an 8-channel DSP amplifier designed for high-resolution audio. It has been designed to work with all car radios. It delivers 6x35 + 2x130 Watts RMS into 4 Ohms and remains stable into 2 Ohms. With its introduction, Alpine has eliminated all the difficulties that usually accompany attempts to adjust the sound of your in-car audio system. Using a digital signal processor, this 8-channel PXE-C80-88 OPTIM8 DSP amplifier offers automatic sound tuning and high-definition performance so you can enjoy the best possible sound quality.so you can enjoy exceptional fidelity, clarity, balance and impact from your music. After initial setup using your PC, all settings can be made automatically using the PXE-C80-88 OPTIM8 control app on your iPhone.
.jpg)
The all-in-one solution
Upgrade your in-car audio system with theAlpine OPTIM8. Featuring a built-in 8-channel amplifier with high-resolution audio playback up to 96 kHz/24-bit, theOPTIM8 is the all-in-one sound solution for effortlessly amplifying and tuning your system in minutes.TheOPTIM8 gives you the flexibility to use your existing audio system or connect a replacement audio system. Theintegrated amplifier has 6x35 + 2x130 Watts RMS into 4 Ohms or 6x70 + 2x260 Watts RMS into 2 Ohms, enough to power a complete audio system. Digital inputs include Coax and USB (DAC), while a high-level speaker input up to 26 V enables the OPTIM8 to be connected to an amplifier already installed in your car.
Customise your audio experience and enjoy Hi-Res sound
Tune your entire audio system in less than 5 minutes thanks to the innovative automatic tuning capabilities of the Alpine OPTIM8. TheAlpine OPTIM8 removes all the complexities of tuning an audio system by providing a simple, self-guided process via the OPTIM iPhone app (iPhone/iPhone).OPTIM iPhone application (iPhone/iPad) or PC software with the KTX-CSP1 external microphone kit (sold separately) to quickly and accurately measure your vehicle's interior.Alpine's Auto-EQ, powered by Eilex PRISM and VIR filters, simplifies the sound tuning process. It provides on-screen instructions so the user can easily perform an accurate measurement of the car's system.TheAlpine PXE-C80-88 OPTIM8amplifier is Hi-Res Audio certified and is capable of reproducing frequencies from 10 Hz to 45 kHz. This ultra-wide bandwidth takes your music to a whole new level of clarity and nuance, achieving a level of detail much closer to that of the original studio recording.
.jpg)
FEATURES :
- 8-channel DSP amplifier
- Up to 8 speaker outputs with independently adjustable output levels
- High-resolution audio playback (96 kHz/24-bit)
- Intuitive real-time sound configuration with automatic vehicle tuning in 5 minutes
- Manual and automatic sound tuning with PC application control
- Automatic sound tuning with iPhone app (iPhone 10 or later)
- Compatible with KTX-CSP1 PC Microphone Tuning Kit (sold separately)
- Power per Channel at 2 Ohms, 14.4V 1% THD): CH1-6 : 70W, CH7-8 : 260W
- Power per Channel at 4 Ohms, 14.4V 1% THD): CH1-6 : 35W, CH7-8 : 130W
- RCA at 10 Ohms 14.4V 0.1% THD): CH1-8 : 4Vpp
- THD+N (high level: 2 Vrms into 4Ω) : ≤0,1 %
- THD+N (RCA: 2 Vrms into 10 kΩ) : ≤0,06 %
- S/N ratio (high level: 40k-AES17+weighted A): ≥80dB
- Signal-to-noise ratio (RCA: 40k-AES17+weighted A): ≥95dB
- Frequency response: 20 Hz-40 kHz
- Input voltage (high level): 26 Vpp
- Input voltage (RCA): 11 Vpp
- Output voltage (high level) : CH1-6: 40 Vpp, CH7-8: 70 Vpp
- Output voltage (RCA): 4 Vpp
- Input impedance (high level/RCA): >50 kΩ
- System sampling rate: 192 kHz/32 bit
- Dimensions (W x H x D) : 220.5 x 54 x 220.5 mm
- Weight : 2.4 Kg
Select your criteria
General information |
Product name |
Alpine PXE-C80-88 OPTIM8 |
Brand |
Alpine | |
Model |
PXE-C80-88 | |
Main characteristics |
Product type |
Amplifier |
Amplification |
Power |
470 W |
Number of channels |
8 | |
Impedance |
4 Ohm | |
Bass optimization |
Yes | |
Warranties |
Commercial warranty |
Seller 3 years |
Legal warranty |
See terms & conditions |
See all Alpine products
Product referenced on 7 Mar 2024
For the moment, there are no customer reviews.Write a review
In the same universe: alpine