Pictures may differ from actual products
The Akasa AK-CCE-7106HP is a low profile (half height) CPU fan designed to fit into small form factor cases. Particularly suitable for Mini-ITX and Micro-ATX motherboards, it is compatible with Intel 775 and 1156 processor sockets.
Akasa AK-CCE-7106HP - Low Profile CPU fan for Intel socket
Select your criteria
General information |
Product name |
Akasa AK-CCE-7106HP |
Brand |
Akasa | |
Model |
AK-CCE-7106HP | |
Technical specifications |
Use |
Processor |
Processor support |
Intel 1156 | |
| Intel 775 | ||
| Intel 1155 | ||
| Intel 1150 | ||
| Intel 1151 | ||
| Intel 1200 | ||
Color |
Gray | |
| Black | ||
Connector(s) |
4-pin Female | |
Ball bearing |
Yes | |
PWM |
Yes | |
Heat Pipe |
No | |
Adjustable speed |
No | |
Cooling type |
Ventirad (active) | |
Top Flow |
Yes | |
Dual tower |
No | |
Max CPU TDP |
73 W | |
Fan diameter |
74 mm | |
Min sound level |
18.9 dB | |
Max sound level |
31.9 dB | |
Minimum rotation speed |
600 RPM | |
Maximum rotation speed |
3000 RPM | |
Max airflow |
33.5 CFM | |
Material(s) |
ABS (Plastic) | |
| Aluminum | ||
| Copper | ||
AIO radiator compatibility |
N/A | |
Dimensions |
Low profile |
Yes |
Height (fan included) |
30 mm | |
Height |
29.5 mm | |
Width |
87.2 mm | |
Depth |
85.2 mm | |
Weight |
220 g | |
Warranties |
Commercial warranty |
Seller 3 years |
Legal warranty |
See terms & conditions |
See all Akasa products
Product referenced on 29 Jul 2010
This fridge fits perfectly in my Mini-ITX configuration, very easy to mount with its thermal paste already applied at the factory.
On the other hand it is a bit noisy...
For a server it's fine but for a PC you'll probably have to change the settings in the Bios.
I needed a low profile fan (less than 45mm) to fit into a 55mm high HIPER HIFI size case.
Mission accomplished, with a CM µAtx GA-B250M-DS3H and a pentium g4600 and 16GB of Ram. The Multimedia Center is very fast and even allows you to play small games in 720p. All this without a graphics card.
I would recommend this ventirad, for me equivalent to the original Intel cooling but much smaller.
Bought it because my basic Intel fan was starting to make noise. But it's even worse with this one. So no interest in fact.
Too bad I don't have any thermal paste, otherwise I would have reassembled the original Intel fan, after cleaning it.
I needed to fit a motherboard into an arcade cabinet and I was running out of space. With this fan, mission accomplished! The radiator barely protrudes from the fan, the space requirement is reduced to a minimum.
And as far as noise is concerned, mounted on a Core 2 Duo, it is quite discreet and even when it gets mad, it remains quite acceptable.
I recommend it!
