Very good product
After 8 weeks of use.
Easy to set up, makes no noise, we can move the screens around at will.
Excellent.
The INOVU ARM 2 arm will be perfect for improving the ergonomics and organisation of your workstation. It has been designed to accommodate two 17 32" notches up to 9 kg per arm. Each arm can be adjusted with tilt, rotation, swivel and height functions.
Double arm stand for 17" 32" monitor
The ARM 2 arm from INOVU will be perfect for improving the ergonomics and organisation of your workstation. It has been designed to hold two 17" to 32" screens up to 9 kg per arm. You can easily adjust each arm withtilt, rotation, pivot and height functions. At the base of the ARM 2 you will find a hub with a USB 3.0 port and 3.5 jack audio connections(microphone and headphones). This robust and high quality double arm is compatible with both 75 x 75 and 100 x 100 VESA displays and has cable grommets for added comfort and aesthetics. This articulated stand will be perfect to save space and comfort.
General information |
Product name |
INOVU ARM 2 Black |
Brand |
INOVU | |
Model |
INOVU ARM 2 | |
Technical specifications |
Number of monitor |
2 |
Screen size |
32 inches | |
Screen weight |
9 kg | |
Adjustable |
Yes | |
Possible adjustment |
Height adjustment | |
Tilt (forward - backward) | ||
Panoramic (left - right) | ||
Rotation | ||
VESA mount |
75 x 75mm | |
100 x 100mm | ||
Width |
1040 mm | |
Height |
478 mm | |
Weight |
5.5 kg | |
Warranties |
Commercial warranty |
Seller 3 years |
Legal warranty |
See terms & conditions |
See all INOVU products
Product referenced on 1 Oct 2020
It does the job, but I was expecting much better handling, it's a bit stiff even after a few adjustments.
I was able to get this double screen arm a few days ago because I needed to free up some space on my desk, the arm is very good quality, there are places along the arm to run and hide the cables (HDMI and power), the instructions are clear, and assembly is fairly simple (if there are 2 of you, as it's a bit trickier on your own).
But there's one point in particular that you need to be very careful about:
The screws supplied to fix your screen to the arm are quite short (M4x12mm), so be careful because if your screen has a deep thread, you'll need to buy longer screws from a DIY shop.
In my case, the screw thread on my screen (AOC Q27G2U) was too deep, so I couldn't screw the screen in using the original screws. Fortunately, you can find similar longer screws in any DIY shop; in my case, 16mm-long M4 screws were able to reach the screw thread and secure my screen.
Be careful not to use screws that are too long either, as you risk damaging your screen if you screw too deep!
Note that washers are supplied to give you extra leeway so you don't risk screwing in too deep.
It's a shame we don't supply several different lengths of screw, but that's the only bad thing about this product :/
Mounting the stand on a desk is easy, using either the clamp or the threaded rod. Adjusting the arms to the weight of the monitors is quick and easy, and the same goes for orientation.
The only small negative point would be the installation of the cable covers, which isn't always easy.
Apart from that, it's good equipment, well finished and solidly built, for less money than a competitor who's an expert in the field.
As described. Delivered on time. The ARM 1 is very good, the ARM 2 is as good, if not better.
In the same universe: arms