Attention AIO
Hello,
Aesthetically pleasing case. But it's impossible to install a MSI MAG CORELIQUID C240 AIO on the front, because the Corsair Vengeance Pro DDR4 is a few millimetres too big.
With its pure design, 8 fan slots, tempered glass centre and RGB lighting, the Zalman S5 mid-tower case has everything you need to perfectly accommodate your configuration.
Mid tower case with tempered glass side panel and RGB lighting
With its sleek design, 8 fan slots, tempered glass window and RGB lighting, the Zalman S5 medium tower case has everything you need to perfectly accommodate your configuration. Enjoy an optimised environment for your components and an ideal internal volume for an ATX, micro-ATX or mini-ITX motherboard. Placed on your desk, the S5 case will not leave anyone indifferent.
The Zalman S5 medium tower case will enhance your setup with its tempered glass side window and RGB front lighting. This optimized environment brings a strong style to your installation! In addition to an internal volume that can accommodate an ATX, micro-ATX or mini ITX motherboard, this model features efficient cooling with 8 120mm fan slots.
And to start your experience with the S5 case, it has two pre-installed fans, one in the front and one RGB in the back. The Zalman S5 is also compatible with a watercooling system, which you can install vertically thanks to the included bracket.
This Zalman case allows you to install up to 6 SSDs, a 190 mm long power supply and a 340 mm long graphics card. On the top, there are two USB 2.0 ports, a USB 3.0 port, audio ports (headphones and microphone) and a button for controlling the LED lighting. Finally, a dust filter is also present on the top to keep your components healthy.
General information |
Product name |
Zalman S5 Black |
Brand |
Zalman | |
Model |
S5 BLACK | |
Main characteristics |
Graphic card max. length |
340 mm |
Max height CPU fan |
163 mm | |
Power supply max. length |
190 mm | |
Power format |
ATX/EPS | |
Case format |
Mid tower | |
Use |
Gamer | |
Material |
Plastic | |
Tempered glass | ||
Steel | ||
Motherboard format |
ATX | |
Micro ATX | ||
Mini ITX | ||
Power supply supplied |
No | |
Design |
Screwless fixing system |
No |
Case color |
Black | |
Front color |
Black | |
Dust filters |
1 | |
Glass |
Yes | |
Tempered glass |
Yes | |
LED RGB |
Yes | |
ARGB LED |
Yes | |
Water cooling compatible |
Yes | |
Expansion slots |
Number of PCI slots |
7 |
Low profile |
No | |
Number of visible 3.5" slots |
0 | |
Number of invisible 3.5" slots |
0 | |
Number of 2.5" slots |
4 | |
Number of 2.5"/3.5" slots |
2 | |
Number of visible 5.25" slots |
0 | |
Number of invisible 5.25" slots |
0 | |
Number of Slot-in slim 5.25'' slots |
0 | |
Number of Slim 5.25'' slots |
0 | |
Front connectivity |
Location of expansion ports |
Top |
Connector(s) available |
Headphone (3.5mm Jack Female) | |
Microphone (3.5mm Jack Female) | ||
2 X USB 2.0 | ||
1 X USB 3.0 | ||
Cooling |
Number of rear fan(s) slots |
1 X 120mm |
Quantity of rear fan(s) supplied |
1 | |
Number of front fan(s) slots |
3 X 120mm | |
Quantity of front fan(s) supplied |
1 | |
Number of side fan(s) slots |
None | |
Number of above fan(s) slots |
2 X 120 or 140mm | |
Quantity of above fan(s) supplied |
0 | |
Number of underneath fan(s) slots |
2 X 120mm | |
Quantity of underneath fan(s) supplied |
0 | |
Water cooling |
AIO radiator compatibility |
120mm radiator |
240mm radiator | ||
Above AIO slot(s) |
240mm radiator | |
Rear AIO slot(s) |
120mm radiator | |
Physical characteristics |
Width |
212 mm |
Height |
465 mm | |
Depth |
398 mm | |
Weight |
5.8 kg | |
Volume |
39.23 l | |
Warranties |
Commercial warranty |
Seller 3 years |
Legal warranty |
See terms & conditions |
See all Zalman products
Product referenced on 12 Dec 2019
Hello,
Aesthetically pleasing case. But it's impossible to install a MSI MAG CORELIQUID C240 AIO on the front, because the Corsair Vengeance Pro DDR4 is a few millimetres too big.
It's not bad for the price, but don't expect to put a power supply worthy of the name, then say in the description that it can accommodate all configurations, not really.
I was lucky to have an evga 725w compact, but it's still very small.
not much room to pack the cables behind it either, so a bit tricky
The case is very good, we feel that the manufacturers have made progress on the placement of the hard drives and the power supply, opening the case on both sides with a cable cover behind, practical but quickly cluttered when you have to connect ssd sata drives or no old 3.5".
I've opted for M2 ssd disks, so no more cables and it's really the best, so the assembly is pretty cool and there's less cabling which makes it much cleaner.
I'm not sure if it's a good idea to buy a new one, but I'm sure it's a good idea to buy a new one, and I'm sure it's a good idea to buy a new one, and I'm sure it's a good idea to buy a new one.
I was not disappointed by the case, nice metal finish and 4mm glass with easy to remove 15mm diameter hand screw, efficient cable management, dust filters on top and bottom.
The case is very well packaged and looks great. It is easy to handle and opens fully (2 fronts + hinged piece to hide cables). The HDD drawer is well hidden and the SDDs can be mounted on the back. The lighting is very nice although there is no indication on how to assemble it (You have to connect the transparent Molex "Led Power" to the power supply output: power supply > transparent > led >* fan, the fan can also be added to this socket as it just needs +5V/GND). The button on the right side of the front panel is very good to manage the lighting. Very simple exterior design. Beware for the back, one of the output slots is already removed but most graphics cards use the one just below... (A cover is delivered with the case but it is quite ugly). Finally, the only flaw that deserves 1* less: the RGB is only present on the left side of the front panel! The right side, although in transparent plastic, has no LED rail... A pity. 4*