Perfect
A lightweight, space-saving tower that's easy to fit on a small desk. Easy to dismantle and reassemble
If you're still looking for a compact case with a unique design, the Aerocool CS-106 is sure to please. It offers excellent cooling performance and storage capacity, and can accommodate Mini-ATX or Micro-ITX motherboards and graphics cards up to 286mm.
Mini Tower Case
If you're still looking for a compact case with a unique design, the Aerocool CS-106 is sure to please. It offers excellent cooling performance and storage capacity, and can accommodate Mini-ATX or Micro-ITX motherboards and graphics cards up to 286mm.
With Micro-ATX and Mini-ITX motherboard compatibility, a processor with a 167mm fan and support for graphics cards up to 286mm (single-fan external chassis / no front heatsink), this case allows you to install a wide range of components.
As far as hard drive slots are concerned, it gives you the opportunity to install one 3.5" hard drive or two 2.5" SSDs.
Designed to accommodate good gaming configurations, this CS-106 case can accommodate the right number of fans so that your configuration can remain at an acceptable temperature in all circumstances. It therefore supports air cooling on the front, back and side of the case to improve cooling performance.
It can also be equipped with a watercooling system if you wish. This allows you to position it at the front of the case for maximum cooling efficiency.
The ABS "brushed aluminium look" front panel gives the Aerocool CS-106 a unique, modern and professional look.
In addition, it has an I/O panel on the side that allows you to enjoy more freedom with its placement. In fact, it gives you quick and easy access to the USB 3.0 x 1, USB 2.0 x 2, HD audio and microphone ports, and the power and reset buttons.
General information |
Product name |
Aerocool CS-106 (Black) |
Brand |
AeroCool | |
Model |
ACCS-PC13014.11 | |
Main characteristics |
Graphic card max. length |
286 mm |
Max height CPU fan |
167 mm | |
Power supply max. length |
160 mm | |
Power format |
ATX/EPS | |
Case format |
Mini tower | |
Use |
Gamer | |
Material |
ABS (Plastic) | |
Motherboard format |
Micro ATX | |
Mini ITX | ||
Power supply supplied |
No | |
Design |
Screwless fixing system |
No |
Case color |
Black | |
Front color |
Black | |
Integrated display |
No | |
Mesh front |
No | |
Glass |
No | |
Tempered glass |
No | |
Fish tank (panoramic view) |
No | |
LED RGB |
No | |
ARGB LED |
No | |
Water cooling compatible |
Yes | |
Motherboard connector location |
Standard connectors (on the motherboard) | |
Expansion slots |
Number of PCI slots |
4 |
Low profile |
No | |
Number of invisible 3.5" slots |
1 | |
Number of 2.5" slots |
2 | |
Front connectivity |
Location of expansion ports |
Top |
Connector(s) available |
Headphone (3.5mm Jack Female) | |
Microphone (3.5mm Jack Female) | ||
2 X USB 2.0 | ||
1 X USB 3.0 | ||
Cooling |
Fan(s) included |
Yes |
Number of rear fan(s) slots |
1 X 120mm | |
Quantity of rear fan(s) supplied |
0 | |
Number of front fan(s) slots |
2 X 120mm | |
Quantity of front fan(s) supplied |
0 | |
Number of side fan(s) slots |
1 X 120mm | |
Water cooling |
AIO radiator compatibility |
120mm radiator |
Front AIO slot(s) |
120mm radiator | |
Physical characteristics |
Width |
199 mm |
Height |
353 mm | |
Depth |
340.6 mm | |
Volume |
18.6 l | |
Warranties |
Commercial warranty |
Seller 3 years |
Legal warranty |
See terms & conditions |
See all AeroCool products
Product referenced on 22 Apr 2021
A lightweight, space-saving tower that's easy to fit on a small desk. Easy to dismantle and reassemble
For an office PC with a small configuration, it's a great choice.
The only downside is the size of the GPU, which is just about right, and it was really complicated to fit the GPU, even though I had a 2 cm margin.
well received the product i used an old motherboard for linux mint in 4 go it works well thank you
It's true that there are much better quality cameras out there.
But for this price range, this is an excellent camera!
I had a bit of trouble packing everything into this rather small case, but in the end I managed.
Apparently there's some confusion about whether or not there are fans (see comments and questions), mine came with a rear fan (3-pin connector) of what seems to be fairly average quality.
I also had to use a 5mm spanner to fix a spacer on the CM that was sticking. Finally, don't wait until you've installed everything in the box before making the connections, you'll probably have to reassemble some parts (I had to!) to get there.
All in all, if you remember that we're talking about a 25€ box, it's all rather correct, even the organisation of the cables was less problematic than I had anticipated.
In the same universe: aerocool 109 | atx | itx case | mini pc | case | mini tower