For Bureatique
This case is not made for gaming, the graphics card has no air and heats up a lot, when I play, I have to open the side of the case to avoid reaching 80°C.
If you're looking for a compact case with a striking design, worthy ofAerocool's usual creations, you'll be delighted with the elegant CS-105 Red case. Featuring a beautiful front panel and side window, excellent cooling performance, good storage capacity and the ability to accommodate Mini-ATX or Micro-ITX motherboards and graphics cards up to 320mm.
The brushed aluminium front panel gives the Aerocool CS-105 a unique and modern look.
The acrylic used to cover the lower half of the front panel allows the impressive 120mm internal fan to be clearly seen.
Finally, the Aerocool CS-105 Red comes with an acrylic side window to further enhance the interior of your rig.
Designed to accommodate good gaming setups, this CS-105 case can accommodate the right number of fans to keep your setup at an acceptable temperature under all circumstances. In addition to the standard front fan, you can add 1 x 120mm front fan, 2 x 80mm side fans and 1 x 80mm rear fan. It can also be equipped with a watercooling system if you wish.
ThisAerocool CS-105 enclosure leaves you in charge. It gives you easy access to a USB 3.0 port, another USB 2.0 port, its audio ports and an HD microphone, as well as its power and reset buttons.
With Micro-ATX and Mini-ITX motherboard compatibility and support for graphics cards up to 320 mm, this case allows you to install a wide range of components.
The numerous hard drive slots (2 x 3.5" hard drives and 1 x 2.5" SSD or 1 x 3.5" hard drive and 2 x 2.5" SSD) are also included.
General information |
Product name |
Aerocool CS-105 (Red) |
Brand |
AeroCool | |
Model |
4718009152557 | |
Main characteristics |
Graphic card max. length |
320 mm |
Max height CPU fan |
148 mm | |
Power supply max. length |
160 mm | |
Power format |
ATX/EPS | |
Case format |
Mini tower | |
Use |
Gamer | |
Material |
Acrylic | |
Aluminum | ||
Motherboard format |
Micro ATX | |
Mini ITX | ||
Power supply supplied |
No | |
Design |
Screwless fixing system |
No |
Case color |
Black | |
Front color |
Black | |
Dust filters |
0 | |
Glass |
Yes | |
LED RGB |
No | |
Water cooling compatible |
Yes | |
Expansion slots |
Number of PCI slots |
4 |
Low profile |
No | |
Number of visible 3.5" slots |
0 | |
Number of invisible 3.5" slots |
2 | |
Number of 2.5" slots |
1 | |
Number of 2.5"/3.5" slots |
1 | |
Number of visible 5.25" slots |
0 | |
Number of invisible 5.25" slots |
1 | |
Number of Slot-in slim 5.25'' slots |
0 | |
Number of Slim 5.25'' slots |
0 | |
Front connectivity |
Location of expansion ports |
Top |
Connector(s) available |
1 X USB 3.0 | |
1 X USB 2.0 | ||
Microphone (3.5mm Jack Female) | ||
Headphone (3.5mm Jack Female) | ||
Cooling |
Number of rear fan(s) slots |
1 X 80mm |
Quantity of rear fan(s) supplied |
0 | |
Number of front fan(s) slots |
2 X 120mm | |
Quantity of front fan(s) supplied |
1 | |
Number of side fan(s) slots |
2 X 80mm | |
Quantity of side fan(s) supplied |
0 | |
Number of above fan(s) slots |
None | |
Number of underneath fan(s) slots |
None | |
Water cooling |
AIO radiator compatibility |
120mm radiator |
Physical characteristics |
Width |
187 mm |
Height |
361 mm | |
Depth |
355 mm | |
Weight |
2.25 kg | |
Volume |
23.96 l | |
Warranties |
Commercial warranty |
Seller 2 years |
Legal warranty |
See terms & conditions |
See all AeroCool products
Product referenced on 20 Sep 2019
This case is not made for gaming, the graphics card has no air and heats up a lot, when I play, I have to open the side of the case to avoid reaching 80°C.
Received to create a server, so very basic but practical use.
Being small, it is well wedged in a corner and does its job with an old motherboard.
For the price it's a nice case.
Aesthetically I'm not disappointed, but the finish is in line with the money invested...
The metal is thin, it bends easily, the plates are linked together by rivets often put askew and sometimes having some play.
Big flaw: the front jacks don't work properly, I can hear in Mono in my headphones. I had to fall back on the motherboard outputs.
For the price (35€) you get a case with a lot of space, you can easily fit a RX5700 and an AverMedia GameCapture HD2.
All this in a metal case (in this price category some "Gamer" cases are made of plastic) with a rather fast fan at the front (which connects to Molex) and which is quite quiet.
I'm not sure if it's a good idea to use a 2.5 slot, a 3.5 slot or a 2.5 or 3.5 slot for a hard drive. I have a VS650 power supply (not modular and with a lot of slots) and I was able to put everything away as I wanted.
I was even able to add a Noctua 80mm PWM fan as the supplied fan is Molex.
By the way, the red fan is very nice. I just removed a star because to some extent it might be better if the front fan was 4-pin because with wear and tear I don't know if this fan will stay so quiet at full speed.
Very good case, easy assembly, good quality sheet metal and screws. However, contrary to what is indicated in the description, there is no slot for a side fan. The only thing you can count on is the two 120 mm fans at the front and the 80 mm fan at the back.
The tower is very nice with the red fan, very nice and quiet. But it is really small and the assembly becomes infernal with the power supply stuck to the HDD and burner connectors. Almost impossible to plug them in. The SSD slots are present but not priceless. Otherwise the quality is average for the price.