Pictures may differ from actual products
TheDeepcool GH-01 is a cushioning system for your graphics card in your case. Thanks to its clever design, you can use it for a graphics card between 47.2 and 255 mm high. The design of the bracket allows the power cable to be hidden.
Fixing and wedging system for graphics card
Select your criteria
General information |
Product name |
DeepCool GH-01 |
Brand |
DeepCool | |
Model |
DP-GCH2-GH01 | |
Technical specifications |
Accessory type |
Graphics card fixing |
Color |
Black | |
Warranties |
Legal warranty |
See terms & conditions |
See all DeepCool products
Product referenced on 14 Sep 2018
This bracket provides a good hold for my graphics card, allowing the PCIe slot on the motherboard to be unloaded. However, you need to be sure when installing it, as it's impossible to detach it without leaving the pre-applied tape.
It's easy to fit, but the fact that the bracket is held in place by an adhesive that's difficult to remove means there's no room for error.
A possible tip is to stick it to Velcro, which is stuck to the case. This is easier to remove.
At least motherboard slots and graphics cards are relieved with this tool.
Be careful, though, because the support bracket is very small and the bend makes an angle of less than 90° with the axis of the bracket, which limits the places where you can put the bracket.
I have a TILTeek FixCard which, in comparison, is a thousand times more complex to install.
This "DEEPCOOL GH-01" graphics card holder does what it was designed to do brilliantly. That's it, I recommend it.
Very good, quality, you can pass the cables inside.
I thought I would need it with a 3080 ti FE, but no, the card is not that big.
Also, I have a closed box (cosmos 2) so I don't need the thousand and one LEDs.
For the price, I think it's the best !
After seeing my RTX 2080 (Aorus) tilt, I bought this little accessory that I can only recommend because yes, it was really tilting and I realised that thanks to it.
I took the model without RGB because I already have a gas factory in my tower and I didn't want an extra cable.
I can only recommend it to owners of large GPUs.
