9€90
This bracket provides a good hold for my graphics card, allowing the PCIe slot on the motherboard to be unloaded. However, you need to be sure when installing it, as it's impossible to detach it without leaving the pre-applied tape.
It's easy to fit, but the fact that the bracket is held in place by an adhesive that's difficult to remove means there's no room for error.
A possible tip is to stick it to Velcro, which is stuck to the case. This is easier to remove.
At least motherboard slots and graphics cards are relieved with this tool.
Be careful, though, because the support bracket is very small and the bend makes an angle of less than 90° with the axis of the bracket, which limits the places where you can put the bracket.
I have a TILTeek FixCard which, in comparison, is a thousand times more complex to install.
This "DEEPCOOL GH-01" graphics card holder does what it was designed to do brilliantly. That's it, I recommend it.
Very good, quality, you can pass the cables inside.
I thought I would need it with a 3080 ti FE, but no, the card is not that big.
Also, I have a closed box (cosmos 2) so I don't need the thousand and one LEDs.
For the price, I think it's the best !
After seeing my RTX 2080 (Aorus) tilt, I bought this little accessory that I can only recommend because yes, it was really tilting and I realised that thanks to it.
I took the model without RGB because I already have a gas factory in my tower and I didn't want an extra cable.
I can only recommend it to owners of large GPUs.
A very well designed, practical and above all discreet little accessory! It is important not to screw up when placing it to avoid placing it under a fan.
This bracket does indeed support a long and heavy graphics card (in my case, a 5700XT nitro + from sapphire).
The bracket is very easy to use and does a good job of supporting it,
The only downside is that the adhesive surface is so strong that I almost couldn't move the bracket.
In the end, in my BeQuiet dark base 801, the support holds very well without the self-adhesive part (I put the protection back on).
Simple and effective, I recommend it for those who don't have any reinforcement on their PCIe slot with a long and heavy graphics card.
Very easy to mount
My graphics card started to bend at the end (very heavy and big cpu)
The pci express slot was starting to not like it
I added this and it's been great ever since
I just modified the product by making a notch in the base to run a power cable from my rtx 2080 ti graphics card.
