Pictures may differ from actual products
Select your criteria
General information |
Product name |
G.Skill RipJaws X Series 8 GB DDR3 1866 MHz CL10 |
Brand |
G.Skill | |
Model |
F3-14900CL10S-8GBXL | |
Memory format |
Typical use |
Desktop computer |
Memory type |
DDR3 | |
Memory format |
DIMM 240-pin (DDR3) | |
Memory |
Capacity |
8 GB |
Memory Frequency(ies) |
DDR3 1866 MHz | |
Memory standard |
PC3-14900 | |
Memory specification |
Unbuffered | |
Number of modules |
1 | |
Capacity per module |
8 GB | |
LED |
No | |
LED RGB |
No | |
Cooling |
Radiator |
Yes |
Radiator color |
Red | |
Fan supplied |
No | |
Timings |
CAS Latency |
10 |
RAS to CAS Delay |
11 | |
RAS Precharge Time |
10 | |
RAS Active Time |
30 | |
These timings are supported with a minimum voltage of: |
1.5 Volt(s) | |
Voltage |
1.5 Volts | |
Warranties |
Commercial warranty |
Seller 3 years |
Legal warranty |
See terms & conditions |
See all G.Skill products
Product referenced on 13 Dec 2011
16GB in 1866 I'm well served, good value for money for an upgrade (my cm not allowing to go above 2133, I turned to the 1866.
The ram is doing its job, just check the bios setting to make sure it's set to 1866
I've bought one a while back for over 60 euros, mounted on different motherboards, I haven't had any problems with it yet, neither with the one I've just bought nor with the one I bought 2 years ago.
Two copies of the RAM sticks were purchased for 16GB of RAM.
Mounted on a Gigabyte motherboard, the bars are automatically recognized.
It's ultra stable, it doesn't heat up much.
CLEAR
Less expensive than the 2133. One 8 slot so it's good because only 2 slots for the CM, waiting for the budget. Windows 7 index at 7.4 out of 7.9, because only one so no dual memory.
I'm not sure if your motherboard is set to 1600 or 1333 or if not, you should set the 1866 in the bios.
It's a very good strip, does what it's asked to do without flinching.
I'm not sure if it's a good idea to set the BIOS to the right frequency, but it was 1333Mhz in my case, so once you push it to 1866 it's just great.
The assembly was easy to do once the correct frequency was checked. You can see the difference immediately after the first use. The transport packaging provides very good protection. The speed of delivery is also noteworthy.
Very good value for money, installed with Asus Z97 Pro gamer motherboard, no worries, does the job properly.
I have 2 of these and will be putting in a 3rd soon.
Gskill you can buy with your eyes closed.
