Pictures may differ from actual products
With its vertical format, the Thermaltake The Tower 100 Mini Tower case is quickly noticed! It features tempered glass panels, two 120mm fans and can support a mini-ITX motherboard, a 320mm long graphics card and a 180mm power supply. On the front, it offers two USB 3.0 ports and one USB-C port and audio ports to suit all your needs.
The Thermaltake The Tower 100 's chassis is made from the finest steel and three 4mm thick tempered glass panels. Its unique design offers a wide range of assembly possibilities to meet all your needs.
On the cooling side, it features two 120mm fans to extract hot air from the back and top of the case and is compatible with a watecooling system. Finally, add two 2.5" disks on the sides and two additional 2.5/3.5" disks by closing the rear fan slot.
Modular design (DMD - – Dismantlable Modular Design) design of the Thermaltake Tower 100 allows a customised configuration to be assembled, using only the essential components for operation.
The case is compatible with Mini-ITX motherboards , graphics cards up to 330 mm in length, fans up to 190 mm in height and power supplies up to 180 mm in depth.
Select your criteria
General information |
Product name |
Thermaltake The Tower 100 White |
Brand |
Thermaltake | |
Model |
CA-1R3-00S6WN-00 | |
Main characteristics |
Graphic card max. length |
330 mm |
Max height CPU fan |
190 mm | |
Power supply max. length |
180 mm | |
Power format |
ATX/EPS | |
Case format |
Mini tower | |
Use |
Office | |
| Gamer | ||
Material |
Steel | |
| Tempered glass | ||
Motherboard format |
Mini ITX | |
Power supply supplied |
No | |
Design |
Screwless fixing system |
No |
Case color |
White | |
Front color |
White | |
Glass |
Yes | |
Tempered glass |
Yes | |
LED RGB |
No | |
ARGB LED |
No | |
Water cooling compatible |
Yes | |
Expansion slots |
Number of PCI slots |
2 |
Low profile |
No | |
Number of visible 3.5" slots |
0 | |
Number of invisible 3.5" slots |
0 | |
Number of 2.5" slots |
2 | |
Number of 2.5"/3.5" slots |
2 | |
Number of visible 5.25" slots |
0 | |
Number of invisible 5.25" slots |
0 | |
Number of Slot-in slim 5.25'' slots |
0 | |
Number of Slim 5.25'' slots |
0 | |
Front connectivity |
Location of expansion ports |
Front |
Connector(s) available |
1 X Headphone (3.5mm Jack Female) | |
| 1 X Microphone (3.5mm Jack Female) | ||
| 2 X USB 3.0 | ||
| 1 X USB 3.1 Type C | ||
Cooling |
Number of rear fan(s) slots |
1 X 120 or 140mm |
Quantity of rear fan(s) supplied |
0 | |
Number of side fan(s) slots |
None | |
Number of above fan(s) slots |
1 X 120 or 140mm | |
Quantity of above fan(s) supplied |
0 | |
Number of underneath fan(s) slots |
1 X 120 or 140mm | |
Water cooling |
AIO radiator compatibility |
120mm radiator |
Above AIO slot(s) |
120mm radiator | |
Physical characteristics |
Width |
266 mm |
Height |
462.8 mm | |
Depth |
266 mm | |
Weight |
6.1 kg | |
Volume |
32.68 l | |
Warranties |
Commercial warranty |
Seller 3 years |
Legal warranty |
See terms & conditions |
See all Thermaltake products
Product referenced on 1 Feb 2021
Super small case for a sober and efficient ITX assembly.
It's possible to add a third fan under the grille between the power supply compartment and the main compartment (120mm/140mm), as long as you're clean about cable management.
The only (micro) drawback is that you have to remove the top plastic cover to access the inside of the configuration (OK, it's only four screws...).
The pluses :
- Especially beautiful ( in white )
- Accommodates the largest GPUs and Ventirads without any problems
-Compatible with SFX and ATX power supplies
-Lots of room for clean cable management
-Removable from all sides for easy access to most components
-Plenty of space for SSDs and HDDs
-GPU well displayed vertically
-Both fans are included
Minus :
- Airflow not so good
-The CM IO is hidden behind the magnetic top cover (and cables are still running)
-Impossible to open the 3 panels without dismantling the top part of the case ( which contains 5 screws )
