Too noisy
They are really too noisy, and hard to install, I don't recommend it, it looks like I have an rs3 in my room
These Jupiter AJ120 fans have been designed by IN WIN to efficiently cool your system. Specially designed for RGB enthusiasts looking for superior performance, they feature seven blades, a long-life plain bearing, ARGB diodes capable of producing 16.8 million colours and an ARGB controller. With a diameter of 120 mm, they can rotate at a maximum speed of 1800 RPM while maintaining a relatively low noise level (35 dB maximum).
As high airflow fans, the Jupiters AJ120 are 30% more efficient than their competitors. They feature PWM technology to ensure your system doesn't overheat. With them in your case you are sure to stay cool, as they are really designed to keep your system cool!
The 7 blades of these AJ120 fans create a very efficient turbine phenomenon. Their noise level of 35 decibels maximum makes them relatively quiet. Their speed can go up to 1800 RPM to quickly evacuate the heat to the outside of the case.
The modular connector will help you to connect the 2 fans together, for a faster and easier cooling. This connector is also very useful for good cable management. The AJ120s are also equipped with 4 shock absorbing mounts with rubber pads, which are designed to absorb vibrations to reduce noise and increase the life of the unit.
Illuminate the inside of your PC with addressable RGB lighting. 16.8 million ARGB colours are possible, which means this Jupiter fan can accommodate any enthusiast's needs. Compatible with several top branded software (Asus Aura Sync, Gigabyte RGB Fusion, MSI Mystic...), they can be synced to the rest of your compatible hardware to provide uniform lighting.
General information |
Product name |
IN WIN Jupiter AJ120 Pack of 3 |
Brand |
IN WIN | |
Model |
AJ12003 | |
Technical specifications |
Use |
Case |
Color |
Gray | |
Black | ||
Luminous |
Yes | |
LED color |
Multicolored | |
Connector(s) |
1 X Addressable LED RGB connector(s) | |
1 X 4-pin Female | ||
Serial ATA power supply | ||
PWM |
Yes | |
Heat Pipe |
No | |
Cooling type |
Active (fansink) | |
Fan diameter |
120 mm | |
Max sound level |
35 dB | |
Minimum rotation speed |
500 RPM | |
Maximum rotation speed |
1800 RPM | |
Max airflow |
70.32 CFM | |
Material(s) |
Plastic | |
Weight |
200 g | |
Use |
Gamer | |
Warranties |
Commercial warranty |
Seller 2 years |
Legal warranty |
See terms & conditions |
See all IN WIN products
Product referenced on 8 Oct 2020
They are really too noisy, and hard to install, I don't recommend it, it looks like I have an rs3 in my room
The argb fan is relatively weak in luminosity compared to my corsair LL120, pads against the vibrations to be installed manually, for the blow I will put just the average.
Nothing to say, they are good case fans since I have them my pc doesn't heat up as much and they are super easy to mount the cables connect to each other and this way it frees up space on the motherboard the RGB is correct I recommend
very efficient fans with an overclocked pc i recommend it for an optimal cooling, small downside the RGB not very nice
Efficient and very nice RGB, the supplied adapter for non-ARGB CMs is a big plus.
Requires a good setting in the BIOS for temperature, otherwise it gets very loud.
The screws supplied with the unit are literally useless and don't fit into the fans, you have to wonder if the guys at InWin tried to fit them before selling them...
I bought these fans to replace the original ones which were noisy and frankly I'm delighted. Absolute silence at low speed, you can hear them a little when they turn at their maximum speed but otherwise nothing to say. Furthermore, their light effects look really good in my tower. I highly recommend this purchase, especially considering their price.
Thanks again ldlc
nothing to complain about argb fan at any price there is an argb controller powered by sata if you don't have argb on your motherboard, quiet fan with a quality feel.