100% recommended
I used them to replace the original battery bars in my DELL G3 laptop and they were so much cheaper than the upgrade offered on the DELL website.
With the new RipJaws SO-DIMM series of high-end PC memories, G.Skill offers ultra-fast solutions with total reliability to take full advantage of your laptop processors. The automatic overclocking of G.Skill RipJaws SO-DIMM Series ensures breathtaking speeds. These memories are designed to exceed industry standards to ensure maximum compatibility.
The memories are assembled from carefully selected components. Each memory has been carefully tested to give you a total guarantee of function and performance. These ultra-compatible memories are perfect for office, multimedia and especially gaming use.
Ultra-stable, G.Skill RipJaws Series SO-DIMMs operate at low voltage (1.2V) and feature optimised latency. To top it all off, G.Skill RipJaws Series SO-DIMM memories come with a lifetime warranty from G.Skill.
General information |
Product name |
G.Skill RipJaws Series SO-DIMM 8 GB DDR4 3200 MHz CL22 |
Brand |
G.Skill | |
Model |
F4-3200C22S-8GRS | |
Memory format |
Typical use |
Laptop computer |
Memory type |
DDR4 | |
Memory format |
SO-DIMM 260-pin (DDR4) | |
Memory |
Capacity |
8 GB |
Memory Frequency(ies) |
DDR4 3200 MHz | |
Memory standard |
PC4-25600 | |
Memory specification |
Unbuffered | |
Number of modules |
1 | |
Capacity per module |
8 GB | |
LED |
No | |
LED RGB |
No | |
Cooling |
Radiator |
No |
Fan supplied |
No | |
Timings |
CAS Latency |
22 |
RAS to CAS Delay |
22 | |
RAS Precharge Time |
22 | |
RAS Active Time |
52 | |
These timings are supported with a minimum voltage of: |
1.2 Volt(s) | |
Voltage |
1.2 Volts | |
Warranties |
Commercial warranty |
Seller 3 years |
Legal warranty |
See terms & conditions |
See all G.Skill products
Product referenced on 13 Aug 2020
I used them to replace the original battery bars in my DELL G3 laptop and they were so much cheaper than the upgrade offered on the DELL website.
Fast delivery to relay points, as ordered.
Installation with a proc. AMD Rysen 3 4300G, two SO-DIMM DDR4 3200 8 Giga memory sticks and two 2.5" disks: 1 SSD and 1 HD. I had a bit of a scare on start-up when the HD wasn't recognised, but it was simply a case of me connecting it incorrectly.
Supplied with the DeskMini: external power supply (transformer and cables), 2 connection cables for 2.5 disks (very specific motherboard connections), CD with drivers, brief but sufficient instructions.
OS installation - W10 - without a problem. To get sound I had to install the Realteck driver supplied to replace the one installed by W10. On this subject: W10 is very annoying because it prevents some of its drivers from being replaced by those on the CD supplied, so I'm looking for a solution.
You'll need a USB hub because the number of outputs is a bit limited (1 USB 2 and 1 USB 3 on the back, 1 USB 3 on the front). I've been using it at home for the last 6 weeks without any problems, and the box is pleasantly compact.
It works well in the NUC, nothing to report. Really, I have to do 100 characters and I have nothing else to say.
Super with Chronopost delivered in less than 24 hours in Belgium super well packaged my laptop thanks you Ldlc :D
I had to wait a long time for the stock to be replenished, at the same time it is normal, in the context of a production crisis, stocks are often empty, but once replenished, the delivery was quick.
It's ram, it works and that's all we ask. It's good value for money if you don't want to break the bank, but be sure to check the compatibility, especially if you already have an array in your laptop, to match the frequency and CAS of the first one and to take advantage of the dual channel.