Quality Price
Simple, without RGB which is becoming quite rare, in 4 strips to multiply the addressing. I'm happy with the result and haven't yet tested this configuration to see how it compares with my old G.Skill kit.
The new G.Skill RipJaws 5 series offers incredible performance solutions. These kits will optimise the performance of next-generation platforms, with the added bonus of strong overclocking potential. With voltage ratings of 1.2V or 1.35V(depending on model), G.Skill RipJaws 5 Series PC memory is optimised for the latest Intel or AMD platforms and ensures compatibility with future ones.
General information |
Product name |
G.Skill RipJaws 5 Series Black 32GB (4x8GB) DDR4 4000MHz CL18 |
Brand |
G.Skill | |
Model |
F4-4000C18Q-32GVK | |
Memory format |
Typical use |
Desktop computer |
Memory type |
DDR4 | |
Memory format |
DIMM 288-pin (DDR4) | |
Memory |
Capacity |
32 GB |
Memory Frequency(ies) |
DDR4 4000 MHz | |
Memory standard |
PC4-32000 | |
Memory specification |
Unbuffered | |
Number of modules |
4 | |
Capacity per module |
8 GB | |
LED |
No | |
LED RGB |
No | |
Cooling |
Radiator |
Yes |
Radiator color |
Black | |
Fan supplied |
No | |
Timings |
CAS Latency |
18 |
RAS to CAS Delay |
22 | |
RAS Precharge Time |
22 | |
RAS Active Time |
42 | |
These timings are supported with a minimum voltage of: |
1.35 Volt(s) | |
Voltage |
1.35 Volts | |
Warranties |
Commercial warranty |
Seller 3 years |
Legal warranty |
See terms & conditions |
See all G.Skill products
Product referenced on 2 Oct 2019
Simple, without RGB which is becoming quite rare, in 4 strips to multiply the addressing. I'm happy with the result and haven't yet tested this configuration to see how it compares with my old G.Skill kit.
1/ Does not run at 4000 Mhz (PC crashes, blue screen), runs at 3200 Mhz max to stay stable.
2/ Unreliable over time, after 2 years all four bars are dead.
Impossible to make them run at 4000 Mhz...it's a scam!
I don't recommend it. As always, we try to save money but we get disgusted more than anything else.
In short, go the other way.
This 32GB RAM kit is affordable and powerful. No frills (LED). The 4GHz performance is of course good, but we'll see over time.
Recommended
I received the package 3 days after ordering, I could test this bar and for the moment nothing to say performant for the price 240euro with postage, now to see on a big use of the bar those that it gives I think that it is more adapted for small
Good morning!
This kit is really cheap for this frequency and the CL18 case is not bad.I get ( by means of a thermal sensor ) max 45 ° on the ram in a room at 23 °. The overclocking capability is limited because Hynix chips are used (hence the price) but with such a price 224 E, we get very good performance and the 4000MHZ are immediately recognized by the XMP profile by the bios. However, I went manual, as I was able to lower the memory controller voltage ( VCCIO ) to 1.2V and the system agent voltage @ 1.15V ( on a Kabylake platform ( I7 7700K @ 5 GHz @ 1.34V ) Z270 Chipset. I was able to raise this memory to 4266 MHZ for 1.45 V on the ram with the same timing. Great!
A good 32GB kit clocked at 4000MHz is the maximum supported by my motherboard (MSI Z370 A-Pro with the latest BIOS). You have to remember to activate XMP.
No RGB, which is a big plus for me!