very well
perfect box for watercooling cutom very nice finish for the price after if you want to put 2 pump c hot
The Phanteks Enthoo Luxe 2 case has been meticulously designed to offer the best of the brand's know-how to the most demanding gamers. Made in a large tower format, the Enthoo has an impressive interior space and can accommodate motherboards up to SSI-EEB format and no less than 12 storage bays for HDDs or 11 for SSDs. In terms of cooling, the case is also capable of accommodating a total of 15 x 120mm or 8 x 140mm fans. Watercooling compatibility has also been pushed to the limit, with the maximum size of the radiator being 480 mm (in front). The best components will fit in without any problem with a maximum length for the graphics card of 503 mm and 120 mm for the ventirad (without GPU). Finally, the creation of a personalised lighting ambience is very simple via the included RGB system (and compatible with those of several major brands).
The Ethoo Luxe 2 has been designed to allow you to create a customised configuration, adapted to your desires! The motherboard, first of all, can go up to SSI-EEB format. For your graphics card, the limit is 503 mm long, enough to fit all the products on the market today without any problem.
The case is adjustable to your needs and you can juggle the hard drive and fan slots to achieve the desired result. A maximum of 12 HDD bays or 11 SSD bays can be used to store huge amounts of data. If you want to focus on cooling, 15 x 120 mm or 8 x 140 m fans can be installed inside the Ethoo Luxe 2.
The icing on the cake is that it is even possible to install a second configuration inside the case based on a mini-ITX motherboard only, relying on a second power supply!
A large system requires a lot of fresh air. Here again, your components will remain at acceptable temperatures even under full load, as 15 x 120mm or 8 x 140mm fans can be mounted in the case.
Watercooling compatibility is of course a must, and a maximum of one 480 mm fan can be installed in the front to ensure optimal cooling. Dust is not welcome in your installation, and therefore 3 dust filters have been added to the package.
Modern but not flashy with a minimalist touch, this case alternates between soft and sharp angles with a very elegant silhouette.
You can also enjoy a full RGB backlighting system on the front and sides, compatible with other brands' sync (Asus, Razer, MSI...). Create the lighting effects you like best and enjoy the show through the large tempered glass side panel.
Practicality has not been left out on the outside, and a rich connectivity is also part of the equipment of the Ethoo Luxe 2: 1 USB 3.1 Gen 2 port, 3 USB 3.0 ports, the classic audio inputs and outputs, as well as buttons to control the RGB backlight.
General information |
Product name |
Phanteks Enthoo Luxe 2 - Black |
Brand |
Phanteks | |
Model |
PH-ES719LTG_DBK01 | |
Main characteristics |
Graphic card max. length |
503 mm |
Max height CPU fan |
195 mm | |
Power format |
ATX/EPS | |
Case format |
Full tower | |
Use |
Gamer | |
Material |
Tempered glass | |
Steel | ||
Aluminum | ||
Motherboard format |
ATX | |
E-ATX | ||
Micro ATX | ||
Mini ITX | ||
SSI EEB | ||
Power supply supplied |
No | |
Design |
Screwless fixing system |
No |
Case color |
Black | |
Front color |
Black | |
Dust filters |
3 | |
Glass |
Yes | |
Tempered glass |
Yes | |
LED RGB |
Yes | |
Water cooling compatible |
Yes | |
Expansion slots |
Number of PCI slots |
11 |
Low profile |
No | |
Number of visible 3.5" slots |
0 | |
Number of invisible 3.5" slots |
12 | |
Number of 2.5" slots |
11 | |
Number of 2.5"/3.5" slots |
0 | |
Number of visible 5.25" slots |
0 | |
Number of invisible 5.25" slots |
0 | |
Number of Slot-in slim 5.25'' slots |
0 | |
Number of Slim 5.25'' slots |
0 | |
Front connectivity |
Connector(s) available |
1 X USB 3.1 Type C |
4 X USB 3.0 | ||
Microphone (3.5mm Jack Female) | ||
Headphone (3.5mm Jack Female) | ||
Cooling |
Number of rear fan(s) slots |
1 X 120 or 140mm |
Quantity of rear fan(s) supplied |
0 | |
Number of front fan(s) slots |
3 X 140mm | |
4 X 120mm | ||
Quantity of front fan(s) supplied |
0 | |
Number of side fan(s) slots |
4 X 120mm | |
Quantity of side fan(s) supplied |
0 | |
Number of above fan(s) slots |
3 X 120 or 140mm | |
Quantity of above fan(s) supplied |
0 | |
Number of underneath fan(s) slots |
3 X 120mm | |
1 X 140mm | ||
Quantity of underneath fan(s) supplied |
0 | |
Water cooling |
AIO radiator compatibility |
480mm radiator |
420mm radiator | ||
360mm radiator | ||
280mm radiator | ||
240mm radiator | ||
140mm radiator | ||
120mm radiator | ||
Front AIO slot(s) |
120mm radiator | |
140mm radiator | ||
240mm radiator | ||
280mm radiator | ||
360mm radiator | ||
420mm radiator | ||
480mm radiator | ||
Above AIO slot(s) |
120mm radiator | |
140mm radiator | ||
240mm radiator | ||
280mm radiator | ||
360mm radiator | ||
Rear AIO slot(s) |
120mm radiator | |
140mm radiator | ||
Physical characteristics |
Width |
240 mm |
Height |
570 mm | |
Depth |
595 mm | |
Weight |
14.3 kg | |
Volume |
81.39 l | |
Warranties |
Commercial warranty |
Seller 3 years |
Legal warranty |
See terms & conditions |
See all Phanteks products
Product referenced on 11 Sep 2019
perfect box for watercooling cutom very nice finish for the price after if you want to put 2 pump c hot
I hesitated for a long time....but in fact I don't regret it!
The finish is really nickel with several mounts available, I chose it for mounting watercoling, a pure happiness I have only one loop but 2 would largely pass. I've only got one loop but two would fit. There's plenty of room for 120 or 140 mounting for the front fans with the right rad, it's great. I have one 140 rad in the front, one 120 in the bottom and one in the top. When I change my CM for one with a toilet I will make 2 loops.
It's a great product and I'm very pleased with the quality of the product.
PS: the box is big and heavy so make some room on the desk.
10/10 for this superb case. It imposes by its size but its elegance makes it an object of decoration. It offers incredible possibilities in terms of mounting. The large volume allows a very good control of the temperature. On my side, it is equipped with 3 Be quiet 140 mm fans on the front and 1 Be quiet 140 mm fan on the back.
An AIO Fractal Design on top completes the air flow.
No vibration noticed.
The ventilation openings are large. They limit the air pressure drop. This helps the fans, which can therefore work on a lower curve. This results in a much higher flow rate. On the other hand, these openings allow some noise to pass through. For me, this noise is not annoying, it confirms me in the idea that my investment works :)
These possibilities push to the purchase, be careful !!!
In the same universe: phanteks enthoo luxe tg