Simple but effective product
Practical, silent tower, for a very affordable price... In short, a 1st price that does the job well
Optimal ventilation and easy installationErgonomic, functional and designed for ultra-efficient component cooling, the Corsair Carbide 100R leaves nothing to chance and will allow you to assemble a Gamer PC PC! The interior space is consistent, generous and superbly well thought out. It's easy to integrate your components and maintain your system.
Ultra functional, the Corsair Carbide 100R has two 5.4" front bays, all the necessary connectivity (USB 3.0, headphones, microphone) and four 3.5" bays for SATA drives. The 3.5" bays are also compatible with 2.5" disks. It comes with 1 fan for good cooling performance and has a superb "Black" steel finish, both inside and out. |
General information |
Product name |
Corsair Carbide 100R |
Brand |
Corsair | |
Model |
CC-9011075-WW | |
Main characteristics |
Graphic card max. length |
414 mm |
Max height CPU fan |
150 mm | |
Power supply max. length |
260 mm | |
Power format |
ATX/EPS | |
Case format |
Mid tower | |
Use |
Gamer | |
Material |
Steel | |
Motherboard format |
ATX | |
Micro ATX | ||
Mini ITX | ||
Power supply supplied |
No | |
Design |
Case color |
Black |
Front color |
Black | |
Glass |
Yes | |
LED RGB |
No | |
ARGB LED |
No | |
Water cooling compatible |
No | |
Expansion slots |
Number of PCI slots |
7 |
Low profile |
No | |
Number of visible 3.5" slots |
0 | |
Number of invisible 3.5" slots |
0 | |
Number of 2.5" slots |
0 | |
Number of 2.5"/3.5" slots |
4 | |
Number of visible 5.25" slots |
2 | |
Number of invisible 5.25" slots |
0 | |
Number of Slot-in slim 5.25'' slots |
0 | |
Number of Slim 5.25'' slots |
0 | |
Front connectivity |
Location of expansion ports |
Front |
Connector(s) available |
2 X USB 3.0 | |
Headphone (3.5mm Jack Female) | ||
Microphone (3.5mm Jack Female) | ||
Cooling |
Number of rear fan(s) slots |
1 X 120mm |
Quantity of rear fan(s) supplied |
1 | |
Number of front fan(s) slots |
2 X 120 or 140mm | |
Quantity of front fan(s) supplied |
0 | |
Number of above fan(s) slots |
2 X 120mm | |
Quantity of above fan(s) supplied |
0 | |
Water cooling |
AIO radiator compatibility |
120mm radiator |
Rear AIO slot(s) |
120mm radiator | |
Physical characteristics |
Width |
200 mm |
Height |
430 mm | |
Depth |
471 mm | |
Weight |
4.8 kg | |
Volume |
40.5 l | |
Warranties |
Commercial warranty |
Seller 3 years |
Legal warranty |
See terms & conditions |
See all Corsair products
Product referenced on 19 Jan 2015
Practical, silent tower, for a very affordable price... In short, a 1st price that does the job well
No problems with shipping and receiving, the product was in perfect condition. The documentation is clear, the parts are easy to disassemble for the inclusion of other components. Once assembled, the case works very well (USB, front jack, etc.).
The only small issue is a slight background noise (which I guess depends on your components).
The case is simple and well finished
There is room for the management cable.
But the crap card is too high.
Very difficult to get the 2 fans on top.
And the heat is concentrated on the high side of the motherboard and its power supply stages!
I'm thinking of buying a new bigger and better cooled case :(
Sober, easy to assemble, many possibilities of cable management, quiet, takes little space for those who have small space, in short good value for money.
The case is clean and well finished
The plexiglass tends to heat up easily
And the start button is small
It is sober and elegant. The case offers a lot of build possibilities for a low price.
Slightly noisy and the cable management is a bit complicated and doesn't give you much freedom but for the price it is forgiven.
The case has a good finish and is simplistic, however the jacks seem to me to be smaller, which means that you have to force the connectors to insert a headphone or microphone plug and it is only sold with a fan at the back, so you will have to buy an extra one.
Very nice case, well finished for the price. I have a Kelvin t12 mounted in the case, but it's very tight at the top and bottom with an ATX. Not AIO compatible with a 120 rad unless you blow up the 5.25 bays (I have a Kelvin t12 mounted in it, I had to blow them up). Not very practical in terms of cable routing but nothing to worry about. For a small configuration it's more than enough. It's well ventilated, aesthetically pleasing, and does what it's supposed to for this price. I'm still going to use a 270r carbide to put a 240 rad.
Delivery: Material delivered on time.
Packaging: Cardboard + polystyrene stamped Corsair.
+ : Correct quality / price ratio, sober aspect / design, possibility of configuration improvement (pay attention to the dimensions of the graphic card) and installation of the components without too much difficulty.
- + : A defective screw thread for fixing the motherboard and needs to be careful when removing the front panel.
The bad tongues will say that an empty can is expensive. I say it's what you put inside that counts. Less well finished than my old Antec box, less silent and 2 or 3 times lighter. Slightly sharp edges, so be careful during assembly.
Trending now: Gaming PC case | Mini PC case | Media Center case | Server case | Transparent PC case | Fish tank PC case | White PC case | RGB PC case | ATX PC case | E-ATX PC case | Mini ITX PC case | Micro ATX PC case | Mini tower PC case | Mid tower PC case | Full tower PC case | Desktop PC case | Water cooling PC case