AEROCOOL CS-107-A-BK-V2
Fantastic, I received my order and it's exactly what I was looking for and everything works as it should.
Fantastic, I received my order and it's exactly what I was looking for and everything works as it should.
It's hard to criticise a box at this price!
The cable management is complicated and the result is imperfect, but that's not my priority.
The fans supplied are fitted with Molex plugs from the last century, which I have to admit made me laugh!
Assembly went well.
Considering the price, the box is great. One star less for 2 reasons,
1st- With a 240mm AIO positioned at the front of the PC, you need the right screws to use the 2 fans (always at the front) to fit into the radiator.
2nd- Prefer a modular power supply because the cable management is a bit tight.
Incomplete screws and bolts: 2 poor quality brass motherboard spacers out of the 4 required!
Archaic MOLEX fan sockets unsuitable for current boards, so no SYSFAN speed monitoring.
I bought this case with a view to making a very low-cost PC, by having 3 fans, so it was a good option.
Once it arrived, the case was extremely light. I had quite a bit of trouble with the power cables, there's really no room for them at the back of the case.
The fans are very good, don't make any noise, and have static lighting.
It's a nice, compact case, but we'll have to wait and see.
Don't forget to buy extra spacers because if you have a 9-hole motherboard, there are only 6 spacers and nine holes to accommodate them.
Molex fans so no control, for the management cable, space allocated, but if as in my case motherboard 9 holes, it will be meticulous and astute to pass the cables, satisfied with my purchase in any case!
I recommend it (especially for the price)!
Three fans with free case. On a more serious note, I don't have a graphics card, so this little case that provides good ventilation is ideal. And I have a non-modular power supply. I used a few cable ties to route all the cables. On the other hand, I changed the fans so that the card could manage them. As a result, everything is quieter and less flashy. And for a microATX with 8 fixing screws like mine, think of 2 extra spacers, only 6 are supplied.
The case looks great, the RGB fans work really well and are quiet. The face is made of mech, which allows good ventilation.
I could only find one major fault with this case, and that was the space for the cable management. If you have a non-modular power supply, avoid this case. However, the quality of the case remains very good and it's a nugget at this price.
Case for Micro ATX configuration.
The case is slightly soft in places and the front mesh is not detachable (the entire front panel is).
This is a very good case for an entry to mid-range configuration.
I removed one of the front fans to put it on another case.
At this price, there's no rubber or shock absorbers or anti-slip pads ;)
If you want absolute silence, this isn't the ideal case (#Bequiet for that). But my ventirad makes more noise than the case/cg/alim fans put together XD
In short, you get what you pay for, and you can invest in the cg and cpu :D
LDLC very professional and very fast, arrived in great condition. I am very sastisfait really. I highly recommend.
The description says "admire the sublime ARGB fans". Except that these are simply fixed RGB fans connected to a molex, so they're non-adjustable and very noisy. I wouldn't recommend it for that reason.
Case not really adapted to the motherboard in fact a lack of space especially for the old hd but my fault I should have thought of it before.
The case was chosen above all for its size, given the constraints of the furniture it was to be housed in. The interior layout is not bad with a minimal configuration: no HDD, just an ssd and a graphics card.
The airflow is not bad thanks to the two front fans, which do the job properly and are very quiet.
My only regret is the LEDs on the fans, which are a visual drawback.