Effective
This is the first time I've bought and installed a heatsink. It's fairly simple to install, but you have to be careful to align it correctly to make it easier to attach the SSD.
This is the first time I've bought and installed a heatsink. It's fairly simple to install, but you have to be careful to align it correctly to make it easier to attach the SSD.
Easy to install, minimalist but sufficient instructions. Accessories supplied.
Assembled in a few minutes.
5 to 10 degrees less depending on CPU load. not bad.
my 970 EVO plus was getting a bit hot despite being my M2 SSD for video games, but since it's been encapsulated it's heating up a lot less.
Easy to install and works very well.
On average I have a 10° gain on my main M2. I will order another one for my 2nd M2.
I bought this product for my ssd card for my ps5, because after research it is very recommended lol, funcionne well and very easy to assemble for a person like me who does not like too much electronics... I advise it.
Really good quality from Be Quiet in force.
It's a good help for the M2's little screwdriver.
I've been using this product for a while now and I'm not sure if it's the right one for me... I'm not sure if it's the right one for me... I'm not sure if it's the right one for me... I'm not sure if it's the right one for me... I'm not sure if it's the right one for me...
With this heatsink, I have gained 10-15" on my three nvme drives, which are now running around 38-42°C.
This is due to the fact that the nvme is inserted in a case.
The only slight difficulty is to adjust it so that the ends are visible.
Pleasantly surprised by the presence of a screwdriver!
The four screws are however extremely small and be careful not to lose them by dropping them. Putting them on adhesive tape was a simple and good idea from Be Quiet.
Be careful with one thing: The large height. It is around 9-10 mm high and therefore it can get stuck when installing the NVME close to a large graphics card.
Installed on an Asus TUF GAMING X570-PLUS to cool a WD_Black 850, the ssd stays between 45 and 55 °C with this heatsink, same temperatures as without.
I don't know what to think about it because the m2 slot is located right between the CPU and the CG, which is naturally very hot and difficult to cool without a good airflow.
- The airflow from the CPU fan is not directed towards the card (Be Quiet Pure Rock 2 Black).
- My case is not very ventilated, a Be Quiet Pure Base 500 on which I replaced the 2 Pure Wings 2 by 2 silent wing 3.
I'm going to add 2 more fans to improve the airflow and see what happens to the temperature.
Otherwise it's extremely easy to assemble, well packaged and the manufacture breathes solidity.
So let's see!
I am very satisfied with my purchase, I recommend the heatsink without any problem.
Easy to install, the instructions are clear and the screwdriver is included!
With a Samsung 980 Pro SSD (512 GB), the idle temperatures of the memory and the controller have been reduced from 37°C / 43°C to 33°C / 35°C respectively.
When the SSD is used, the temperatures rise less quickly and less high than before, so this heatsink fulfils its role perfectly.
Product as described. Easy to assemble (screwdriver included!!!). It's hard to say what the temperature is like, it's hard to reproduce identical situations for comparison, but for me adding aluminium with a little air flowing through can only be good!
Hi, My base ssd cools not heatsink of the motherboard 40 degrees and with this material it is only 30 degrees. Great product nothing to say. I have 2 crucial 1TB ssd and I follow the temperature with the specific software for crucial ssd. I recommend this product very efficient.
Everything is in my screen. Frankly disappointed!
I don't recommend it.
https://i.imgur.com/OopVCrZ.png
I made this purchase to better dissipate the heat from my SSD that I built into my PS5. It's true that it's not compatible because it's too high (13mm instead of 11mm), but it fits and it does the job. For the PS5, I recommend the BE QUIET! MC1 only.
Hello
I put it in my PS5 but I can't put the metal cover back on to close the slot. Is this a problem?
The look is cool, but that's it... I had to gain what... 2 degrees on my nvme... yet advised by samsung.... and my case is super super super ventilated... but my nvme are still too high temperature anyway... like before....
I've been using it for a while now and it's great. My motherboard is an MSI B550 Gaming Plus which has two NVME slots but only the first slot has a heatsink, the second is left "open air". With this heatsink it now runs at around 38-40 C, so the temperature gain is quite significant.