Does the job
Perfect for installing a 2.5" SSD in a tower. To upgrade an old PC at a lower cost (you also have to buy the SSD...)
Review automatically translated
Customer reviews of the Adapter for 2 x 2.5" HDD/SSD in 3.5" bay
6€95
Global rating
8/10
based on 19 reviews
Editorial and moderation guide
-
47%9 reviews
-
26%5 reviews
-
21%4 reviews
-
0%
-
5%1 review
Most helpful positive review:
Read more
Most helpful critical review:
Non-standard tapping
For an adapter that is supposed to fit in a 3.5" slot, it's a shame that the screw holes don't use the same thread pitch as the hard drives.
Review automatically translated
-
Number of reviews: 2 Average rating: 10
Does the job
Perfect for installing a 2.5" SSD in a tower. To upgrade an old PC at a lower cost (you also have to buy the SSD...)
Review automatically translated -
Number of reviews: 18 Average rating: 9
2.5" HDD+SSD mounted
Well mounted in my case. However, I had to reverse the SATA cables because the angled cables cannot be connected! Other than that, everything is fine.
Review automatically translated -
Number of reviews: 6 Average rating: 8
Practical, but...
Support for two SSDs. Handy but the holes for a screwdriver to fix the lower drive would be much more adequate if they were larger in diameter to allow the screw heads to pass through to fix the drive using the screws provided.
Review automatically translated -
Number of reviews: 45 Average rating: 9
Simple and effective
Simple device to insert 2.5" storage media into 3.5" bays.
This is my third of its kind (used in a server).
Very practical provided that you don't have to dismantle too often.Review automatically translated -
Number of reviews: 9 Average rating: 8
Indispensable
This is the second time I have bought this product, which is very simple and very good for mounting a 2.5" SSD in a 3.5" slot.
I'm very happy with this product and it's very easy to use. I recommend it!Review automatically translated -
Number of reviews: 3 Average rating: 9
Very good
I bought this adapter after hesitating for a while (after seeing the not so positive reviews), but I went for it.
For my part, it is the exact dimensions and allows to correctly fix 2 SSD/HDD of 2'5 in a 3'5 bay.
The screws are supplied with it and allow a good hold of the part and the SSD.
Nothing to complain about.
For a piece of metal like this, it doesn't have to be more expensive, but it's still a few euros, so that everything is correctly arranged in the machine, so don't hesitate!Review automatically translated -
Number of reviews: 24 Average rating: 9
Union minimum
It is true that this product does what it is asked to do. On the other hand, no application in the manufacturing process (off-axis drilling, presence of chips, tapping a little stiff).
Review automatically translated -
Number of reviews: 2 Average rating: 7
Not entirely satisfied
I had to do some DIY to be able to mount the adapter on the tower of my computer.
It's a pity because I'm not completely satisfied.Review automatically translated -
Number of reviews: 4 Average rating: 7
Non-standard tapping
For an adapter that is supposed to fit in a 3.5" slot, it's a shame that the screw holes don't use the same thread pitch as the hard drives.
Review automatically translated -
Number of reviews: 4 Average rating: 7
Functional!
Nothing more to say, it perfectly matches the size of my racks, it supports my 2 SSDs.
The only fault is that the SSDs are a bit recessed from the edge, so the power cables overlap a bit and force the hard drive to be plugged in.Review automatically translated -
Number of reviews: 19 Average rating: 9
Does the job
This adapter is what it is intended for, however it requires laptop hard drives (2.5"), which is not really useful for a tower. (3.5" slots provided)
More suitable for mATX/microATX configurations (cf: shuttle) than for ATXReview automatically translated -
Number of reviews: 1 Average rating: 5
Not suitable for my ANTEC NSK6582 box
I have nothing to say about the product itself, but it is not suitable for my ANTEC NSK6582 box. And yet it is an LDLC technician who advised me to use it after having asked me for my box!
I found a solution by tinkering a bit...Review automatically translated -
Number of reviews: 15 Average rating: 8
.... no functional note .
How to say ... it's just an adapter, the only positive point is the bag of screws, that others would not have provided,
Now, clearly, it's good because it was "urgent" otherwise those of other sites would have been my choice, 10 euro for just a folded sheet and 8 screws, no comment ^^Review automatically translated -
Number of reviews: 17 Average rating: 9
Practical but beware of assembly
Handy for putting 2.5" in a 3.5" slot.
A bit difficult to fix the bottom drive but not insurmountable either.
The only real criticism is the finish. It's rough and therefore a bit sharp on the edges. But it's not a piece that you move every day. Once in the tower, you forget this little detail...which costs a star.Review automatically translated -
Number of reviews: 67 Average rating: 9
To install an SSD in place of a 3 1/2" HDD
Hello,
I took this 2 HDD/SSD 2.5" adapter, to install an SSD in a MicroATX, which had no 2.5" slot.
I've been using this adapter to install a 2.5" HDD/SSD in a MicroATX tower that doesn't have a 2.5" slot. It's easy to install, for the moment there is only the SSD, the tower only had 2 3.5" slots internally, thanks to this adapter I can install an additional 2.5" HDD/SSD, so I have 1 SSD and 2 HDDs or 2 SSDs and 1 HDD.Review automatically translated -
Number of reviews: 1 Average rating: 6
bof
The screw holes for mounting on racks are very small and are not suitable for fast ergo cases from the HAF cooler master family. The SSDs will for some be too centered on the plate which makes connecting the power and SATA sockets complicated or impossible in some cases. The bottom SSD mounting holes are very small and will be very inconvenient for you if you have to change/remove them regularly. In short, I've seen much better. I've seen better. Good point for the included screws and bolts which are exhaustive.
Review automatically translated -
Number of reviews: 16 Average rating: 10
Very good adapter!
Good delivery! This 2.5" adapter is excellent. I use it in a 3.5" drive slot for a CoolMaster 690 II Advanced enclosure. My 2 SSDs are well installed!
A LDLC product that I recommend!Review automatically translated -
Number of reviews: 10 Average rating: 9
perfect
The only problem is that I ordered with the express delivery which arrived late (rather the responsibility of chronopost than of ldlc). The only problem is that I ordered with the express delivery which arrived late (rather the responsibility of chronopost than ldlc) but ldlc proposed without making a fuss the reimbursement of the difference with the normal delivery. I am very happy with the item and ldlc.
Review automatically translated -
Number of reviews: 1 Average rating: 10
top!
Indispensable for upgrading from HD to 3.5 on an SSD!
Easy to mount on a large tower and all supplied with it so no need for anything else!
The assembly is made for 2 SSD! nothing to say!Review automatically translated
Similar products
Best sellers
